Hi guys,
I am new member on here and have just bought a 78 X-19 with a 1500cc engine fitted. I have bought a set of wheel similar to the image below for the car. Mine are 13 x 6 and have been powder coated in silver. My question is related to the wheel bolts, the car currently has 40 mm length wheel bolts that are way to small/short for the new wheel. I also want to convert over to wheel studs and nuts as offered through mid west Bayless in the us. I am not sure what length I would need however as they come in 50mm, 65mm and 80mm lengths. I am not sure of the exact off set of the wheel I have ethier I asume it is between 30 and 40mm as they fit easily. What length stud would you guys recommend? These particular wheels will aso required a nut with out a taper at the bottom and a washer. Cheers Nigel
I am new member on here and have just bought a 78 X-19 with a 1500cc engine fitted. I have bought a set of wheel similar to the image below for the car. Mine are 13 x 6 and have been powder coated in silver. My question is related to the wheel bolts, the car currently has 40 mm length wheel bolts that are way to small/short for the new wheel. I also want to convert over to wheel studs and nuts as offered through mid west Bayless in the us. I am not sure what length I would need however as they come in 50mm, 65mm and 80mm lengths. I am not sure of the exact off set of the wheel I have ethier I asume it is between 30 and 40mm as they fit easily. What length stud would you guys recommend? These particular wheels will aso required a nut with out a taper at the bottom and a washer. Cheers Nigel