dan in new mexico
Daily Driver
well it took a while but I'm finally back on the road. in the end had to cut the line at the connector. special vice grips would probably have worked if I had used them sooner. made a bubble flare with my new kit..used a new connector, then spent hours under the dash wrestling things back together. had a hard time getting the plunger into the back of the mc...and it was tough to wrangle the output line into a straight in position for connection...then on to bleeding! having read many posts I decided to order a pressure bleeder. I ordered the schwaben brand unit from ecs tuning..free shipping. it seems to be well made..and worked nicely. Thanks for all the tips I used along the way