Janis
True Classic
Deep in garage boxes found BMW e36 front suspension arm bush.
Fits exactly into snail mount (~4mm thinner).
Centre cylinder have to be used from old X19 bush. It fits too good, so I put a thin layer of wd40 can between bush and centre cylinder.
In link part nr6
http://www.realoem.com/bmw/enUS/showparts?id=CF91-EUR-02-1995-E36-BMW-325tds&diagId=31_1251
Not sure if they have different stifness between 1.6 compact and 2.5 touring(but this one with cast iron block is the heaviest one, springs definitely are different)
Fits exactly into snail mount (~4mm thinner).
Centre cylinder have to be used from old X19 bush. It fits too good, so I put a thin layer of wd40 can between bush and centre cylinder.
In link part nr6
http://www.realoem.com/bmw/enUS/showparts?id=CF91-EUR-02-1995-E36-BMW-325tds&diagId=31_1251
Not sure if they have different stifness between 1.6 compact and 2.5 touring(but this one with cast iron block is the heaviest one, springs definitely are different)