Jepp78bertone
True Classic
I figured that while I had the motor on the stand I would figure out my alternator bracket for the 1 wire GM powermaster alternator I picked up for this project.
Heres some pictures of the bracket mods needed to fit it.
As you can see I had to file a slight hollow in the alternator to allow for the heim joint to turn to be able to adjust the length of it.
I still need to source a longer high grade bolt for the top heim joint mount to ensure it’s secure.
Heres some pictures of the bracket mods needed to fit it.
As you can see I had to file a slight hollow in the alternator to allow for the heim joint to turn to be able to adjust the length of it.
I still need to source a longer high grade bolt for the top heim joint mount to ensure it’s secure.