Dan Sarandrea (Phila)
Waitin' On Parts...
Just curious if anyone has come up with good ideas for adding cooling system bleeder capabilities, or good ideas to improve upon the OEM engine block coolant drain petcock?
There's this nice item from the Monte Hospital that would go into the heater hose at the right rear of the engine, but it's not presently available:
Papa Tony has been advocating the use of an inexpensive "Prestone" (or equivalent) flush tee in more or less the same location:
My G35 has a bleed tee that if the right hose size could certainly be used on an X:
And IIRC Bob Grasch used this nifty push-button bleed valve when he converted to a Scirocco radiator:
Anyone have any other nifty items or ideas for bleeders or for block drain petcocks?
There's this nice item from the Monte Hospital that would go into the heater hose at the right rear of the engine, but it's not presently available:
Papa Tony has been advocating the use of an inexpensive "Prestone" (or equivalent) flush tee in more or less the same location:
My G35 has a bleed tee that if the right hose size could certainly be used on an X:
And IIRC Bob Grasch used this nifty push-button bleed valve when he converted to a Scirocco radiator:
Anyone have any other nifty items or ideas for bleeders or for block drain petcocks?