Chromaphase
True Classic
Sorry, can't figure the cause of the overflowing, but the float does possibly look out of adjustment, especially the drop (distance B on the diagram), yours looks more like twice the spec:
View attachment 74311
I just tried it and it works now ! Big thanks to all of you...
So I did bend the lug (3) a LOT... because it was going like crazy.
And I bent tang (7). but not to the distance adjustment on this schematics, because it looked non sense to be honest on my floater.
First A was exactly 7mm, and B was like 3cm...
So What I did I bring Back B to 2cm, and I bent (7) to get more like 10mm, or 12mm... just bent a bit.
It makes sense becasue if it stays open it's because of the A not enough down...
Anyway it works now... less pray that the several flooding I got from it didn't do any harm to my motor or else...
So Now I have the two barrels, I have the pump, I have no flooding !