Little update.
First my website that I have been posting pics on is out of commission temporarily and once I get it up and running the pics that have disappeared should be back.
Here I have a few new ones that I will temporarily host on imgur.
Not much has been done this winter as my father is doing a large overhaul of his instrument panel on his plane.
Here is the album of the new stuff mainly he front clip.
https://imgur.com/a/2cPZVst
The entire front clip will weigh less than 50 lbs.
This will be his front end with a slight modification. The base board that is holding everything will be carbon fiber.
The sides in front of the wheels will be extended another 2” on each side to cover the wheels. That front end is wider than the stock fiat as is and he will add 2” of width to it with foam and layers of fiberglass.
The entire front end is about 4.5” wider than a stock fiat and the rear is about 6” wider.
The wheel base is within an inch of stock. With only minor adjustments to allow more room for the engine.
All of the front end is custom high strength aluminum and will be riveted when finalized.
Tubes for cooling the brakes will be routed through the gaps on the sides of the radiator