fiatfactory
Steve Cecchele
No, it involves re shaping the entire box, the only point that is the same is the rear inside corner that I used as my datum, every other face is replaced, the battery box material is far too thin / weak to support the loads from a pedal box.Why the steering wheel on the left? Because it was easier to mount the brake/master cylinder in the battery box?
I've used stainless steel plate, as it has more tensile strength (and will look really pretty when polished up) as part of the front edge is unsupported (the whole pedal box / cylinders slides in like a cartridge)
I did it like this simply so I could use the original battery cover to cover / seal the whole assembly.....
SteveC
Last edited: