Michael Termine
MichaelT
Almost 2 years ago I purchased a 1970 850 Coupe 903cc that previously was being turned into a "gasser", so they pulled just about everything out of the car and cut anything and everything where ever convenient. Since then, my son and I replaced the entire braking system, had the engine rebuilt (by Danny at FIAT), fixed some serious rust issues behind the back seat, and labeled the entire wiring harness. The engine is back in but when we tried to start it, the starter would spin the engine only a quarter turn or so. I cleaned up the body ground from the battery and will be giving it another try this morning, but I suspect the no-start may also be related to what I believe is the only remaining unidentified wire.
I know per the wiring schematics that there is a brown wire going from the alternator (I confirmed this when I found the cut end) that goes to the starter, but I do not know where it goes on the starter. Does anyone have any pics of this wire?
I know per the wiring schematics that there is a brown wire going from the alternator (I confirmed this when I found the cut end) that goes to the starter, but I do not know where it goes on the starter. Does anyone have any pics of this wire?