ashmowerman
Ashley Stone
Hi all can I remove the heater core from an X19 with AC without removing the whole heater box?
Mine has sprung a leak
Mine has sprung a leak
On a AC equipped box??Actually I’ve done this a couple times and yes you can.
Just unclip the bottom which houses the fan and slide out from RHS.
Only caveat to this is I have an ‘88 Bertone and there is a scolop in the centre tunnel on drivers side (my car is RHD).
Forgot to mention that you must take out centre console first though.
RHD might make a difference. IDKOn a AC equipped box??
Hi, quick question was your peddle box in at the timeI’ve just retrofitted my ‘88 RHD Bertone X1/9 with A/C and I can most definitely confirm that the A/C HVAC unit comes in and out in each segment as that’s how I’ve done it a few times now whilst I sorted out HP hoses and connections.View attachment 63771
Bottom segment holding fan unclips and slides out on drivers side (Australian RHD) via cutout in centre tunnel allowing access to heater core.
Funny enough RHD X1/9’s were never A/C’d from factory so I thought LHD models be easier than my RHD.
Yes pedal box is in place and as I’m RHD I’ve also the steering column.Hi, quick question was your peddle box in at the time