jcstuckinmuck
Daily Driver
Hi all, Onward with the coversion as you can see in the pictures this is the progress, so far carb removed and manifold, injection manifold on new gaskets, injectors are in with new seals,half of the harness is connected,so far so good and i have now the pinouts of the double relay.
The oxygen sensor port is fitted on the exhaust see picture and i have the new sensor and is ready to be installed
Now the fuel pump issue, can i use my carb tank, i was thinking of mounting the pump on the end of the sender unit and cut the pickup pipe and connect the pump in line, does this seem a good route!!. Second I notice the the blower motor for carb cooling fan has to come out as it would foul the meter unit, where does cooling fan go on the injected cars, picture would be helpful
Now the ecu pictured, is this where it sits on the injected cars,as the spare wheel will not fit in anymore, how is it done, aso any pictures
The cold start valve can be purchased not a problem, but the sensor in the head is as the temp gauge sensor is the only one in the head, also i know i need the thermostat housing too, which i dont have yet, can anybody think of anything else that i need to fit?
Please bear in mind iam in the uk and some of the parts need are hard to find here,many thanks john
[/URL][/IMG]
The oxygen sensor port is fitted on the exhaust see picture and i have the new sensor and is ready to be installed
Now the fuel pump issue, can i use my carb tank, i was thinking of mounting the pump on the end of the sender unit and cut the pickup pipe and connect the pump in line, does this seem a good route!!. Second I notice the the blower motor for carb cooling fan has to come out as it would foul the meter unit, where does cooling fan go on the injected cars, picture would be helpful
Now the ecu pictured, is this where it sits on the injected cars,as the spare wheel will not fit in anymore, how is it done, aso any pictures
The cold start valve can be purchased not a problem, but the sensor in the head is as the temp gauge sensor is the only one in the head, also i know i need the thermostat housing too, which i dont have yet, can anybody think of anything else that i need to fit?
Please bear in mind iam in the uk and some of the parts need are hard to find here,many thanks john