Installed a MWB head on my '83 X1/9. Finally got the timing set up, and at the point that I have put a few miles on it and need to retorque the head, per the MWB recommendation (they supply regular head bolts, not the factory stretch bolts). I have the special wrench, which should help me reach the bolts in the corners, but with the intake manifold in place, reaching the centre bolt on the intake/exhaust side appears to be almost impossible. Is there some sort of special tool combination that let's me get in there without removing the intake manifold, or do I need to bite the bullet and take it off?
TIA!
Martin
TIA!
Martin