Serhiy Luchkey
True Classic
Main connector for the head unit, it’s got power , ground and all wire for 4 speakers so I’m keeping it to use in the X1/9
Fiat 500 Turbo engine swap
- Thread starter Serhiy Luchkey
- Start date
Serhiy Luchkey
True Classic
Before and after 
Serhiy Luchkey
True Classic
Main wire harness is out and ready for trimming
Serhiy Luchkey
True Classic
Some of the wires has been
removed already
Serhiy Luchkey
True Classic
Main wiring harness finished, all unnecessary wires and sensors removed. Only keeping what is absolutely needed: ABS, O2 sensors, transmission, immobilizer?, automatic transmission shift selector plug, speedometer and throttle pedal plugs, cooling fan plugs, power steering controller, brake pedal. Only reverse lights wiring kept for the reverse lights to work.
Serhiy Luchkey
True Classic
This is all that I removed already, just a few more wires and sensors still need to be trimmed from under the dash wiring harness
Serhiy Luchkey
True Classic
Is it going to work?
Last edited:
You will need to change out the picture of the 500 on startup.
Serhiy Luchkey
True Classic
Just a little more prep work on Fiat 500 and then X is nextYou will need to change out the picture of the 500 on startup.
Serhiy Luchkey
True Classic
I’m using Fiat 500L speedometer to swap Fiat 500 Turbo into Fiat x1/9
Last edited:
Serhiy Luchkey
True Classic
Someone would like to try this swap, it fits 
Serhiy Luchkey
True Classic
Fiat 500 wiring harness is done and ready to transfer into the X. Here is some pictures of the modifications to the X needed for this swap
Serhiy Luchkey
True Classic
Transmission support
mount
Serhiy Luchkey
True Classic
Engine support mount
Serhiy Luchkey
True Classic
Rear engine mount
Serhiy Luchkey
True Classic
Since this is a automatic transmission cross member needs more cutting than manual transmission to fit wider auto transmission
Serhiy Luchkey
True Classic
Serhiy Luchkey
True Classic
Pictures from black one which is my test body, turbo engine going into golden? X. Next step is to install wiring before engine is going in
Serhiy Luchkey
True Classic
Serhiy Luchkey
True Classic
Sounds better
and not as wide at the bottom so should be easier to install 