spiderrey
spiderrey
:mallet:the head is still stuck on the block, believe it or not. i welded the nuts to the studs, but they broke loose. so i grinded dowwn to fresh metal and welded again, one came out. the weld held on the next one , but the stud broke flush with the head. then i accidentally broke one loose. the threads were junk, so i found a different nut to thread on to it so i could reweld. it was difficult to turn this nut on. when it was almost on it broke the stud loose going in, so i just reversed it out. the next one i welded the nut on and turned it in. it broke loose. 2 left, one is flush with the head the other sticks out, but i cant get a nut started. for now it sits filled, the holes with spray and will play with it again tommrow. im begining to wonder if its even worth the effort totaking apart.:headbang: