lookforjoe
True Classic
Just want you to know how much I enjoy watching you go through your builds. Fait, Volvo, house, doesnt matter very entertaining to me
Odie
Many thanks for the compliment
Working on the unglamorous bits - tying the beam & C pillar sections. Horrible work, as even with a leather apron, I'm getting burns from the MIG spatter Did the left side outer wedge & inner plate to match the right side
ground back, primed & seam sealer, both sides. Routed the gate washer fluid hose up the C pillar while I was there. Have to remove the roof at least one more time, so I'll address the hose pass through to the gate at that time.
forgot that I needed to weld the right side C pillar base into the door skin, so got that out of the way. Used 3/32" filler rod to bridge the gap
Still have to bridge that inner gap on the C pillar vertical. The visible gaps in what was the rear door cap are intentional - those retain the belt molding
lastly, I got some film to use on the edge of the lexan 1/4 windows - the Volvo glass all have a gradient edge to mask the bonding, couldn't find anything that matches
Last edited: