Tavalin
Florida Mike (again)
Hello again everyone.
I have changed out the aftermarket distributor and placed the original Bosch rebuilt one back in and rewired back to original.
I left the new coil in place. Reset the timing to plus 10 degrees using the flywheel mark. Now on the test drive there was not much power and the X1/9 kept stalling out. I do not know what went wrong.
So, I figure it could be the coil or the timing is still out a few degrees.
Pic of the coil is below.
Your thoughts are much appreciated...
Mike
I have changed out the aftermarket distributor and placed the original Bosch rebuilt one back in and rewired back to original.
I left the new coil in place. Reset the timing to plus 10 degrees using the flywheel mark. Now on the test drive there was not much power and the X1/9 kept stalling out. I do not know what went wrong.
So, I figure it could be the coil or the timing is still out a few degrees.
Pic of the coil is below.
Your thoughts are much appreciated...
Mike