My mistake, I thought the box with 0-100 kp/h in 172 meters and 10.52 secs was his time.
“Race stats” app on ios.It's a little confusing with the "best" 0-62/100kph shown as 6.47sec. Where did the "best" time come from?
Multiple trys.It's a little confusing with the "best" 0-62/100kph shown as 6.47sec. Where did the "best" time come from?
The wheels look fantastic!Some pics of the new suspension with the Biturbo rims.
New Springs & KYB‘s plus the anti sway bar up front
How does one do this without a lift? Or did you have a lift...Cleaned the engine compartment and reinstalled the engine. Getting closer but master cylinders next...I’ve left those for last. View attachment 47237View attachment 47238
It is not too difficult to get the rear of the car up high enough to slide the engine under it using jacks and jack stands. I actually used cement blocks and a 4x10 across the bottom of the car where the jack points are. I had an engine hoist so I used it to pull the engine up through the engine compartment to the correct position. You could probably do that step with a floor jack if you did not have a hoist.How does one do this without a lift? Or did you have a lift...
I have a lift. I have too many memories of transmissions on my chest during my younger years. I’ve used an engine hoist before like Don has too on these cars.How does one do this without a lift? Or did you have a lift...
Yes, nothing like bench pressing an X trans off your chest and into position.I have a lift. I have too many memories of transmissions on my chest during my younger years. I’ve used an engine hoist before like Don has too on these cars.
So you raise the car as the engine sits on a table?I have a lift. I have too many memories of transmissions on my chest during my younger years. I’ve used an engine hoist before like Don has too on these cars.